Part Details

The Devil's in the Details.

Energy Suspension 9.13105


Pin Opening Diameter Base Opening Diameter Height of Boot Piece Number
13mm (0.511 inch) 36.35mm (1.43 inch) 24mm (0.945 inch) 13005
Here is our complete list of universal dust boots.

Also called:
  • ENE-9.13105G
  • ENE-9.13105R
  • ENS-9-13105G
  • ENS-9-13105R
  • 913105G
  • 913105R

Video Review

Because sometimes ... Seeing is believing.



What do I replace my rubber Ball Joint or Tie Rod End dust boots with?

This video will show you how to measure your tie rod end or ball joint to replace the OE dust boot on your vehicle. For Energy Suspension Polyurethane Universal Dust Boots EnergySuspensionParts.com/Universal-Dust-Boots.asp

Many of you are discovering that your tie rod dust boot or ball joint dust boot has rotted away or even split. As a solution, Energy Suspension offers several universal polyurethane dust boots to replace these on your vehicle. You will need to measure three points on your existing joint in order to choose the right boot. Measure the diameter of the base, the diameter of the Pin or Stud, and the height of the boot. With this information you can visit our Universal Dust Boot page to find a part number that you can use to replace your OE boots.

For all of the parts we carry for your vehicle EnergySuspensionParts.com

User Reviews

Ya never know ... until you've tried it!



https://www.suspension.com/prodimages/energy-suspension/9.13105/energy-suspension-9.13105-large-1.jpg

Good

This part works well and fits properly for the tie rods. It does not work for the ball joint boots even though it is listed for them.

George Robertson

https://www.suspension.com/prodimages/energy-suspension/9.13105/energy-suspension-9.13105-large-2.jpg

terrific!

Fit perfectly on the tie rod ends of my TCI Model A chassis to replace the torn originals.

Paul Sturtz

https://www.suspension.com/prodimages/energy-suspension/9.13105/9.13105-360-1.gif

Good

They looked too small until I installed them, but they fit and look great.

Tim Garrison

https://www.suspension.com/prodimages/energy-suspension/9.13105/energy-suspension-9.13105-360-2.gif

Look good but time will tell.

Had a torn boot on a ball joint on my 86 944. Replaced it with a part I found at the local CarQuest, that part lasted only a few months and then wased and distorted. Researched Ball joint repair kits for 944 and found the ES part number. So far I'm pleased, the part fits well and I'm expecting it to last a long time.

Craig Christensen

Good overall fit very happy with parts

Fit to my 1998 Dakota was good, not an exact fit but close. Seals my ball joint except on tight turning situations. Almost pops off the ball joint. This is way better than the split trashed old boots. Stops dirt and water quite well. Should extend my ball joint life considerably. Allows me to grease the ball joint by installing quality grease in the boot before installation of boot. Here is a tip remove the old boot and old boot clamp springs and clean out all old grease and dirt 100% before installing new boot and grease. Ball joint can now be greased with a grease needle fitted to grease gun.

Jeff M Stewart

Where do I buy this?

I. Need. This. NOW

Suspension.com

$3.82

  • suspension.com has the 9.13105
  • Same day shipping on THIS part
  • Overnight shipping available
  • International Shipping via DHL

Buy it now!

https:energysuspensionparts.com

$3.82

  • https://www.energysuspensionparts.com/ has the 9.13105
  • Authorized Dealer of Energy Suspension
  • Full Manufacturer's Warranty Support
  • Expedited shipping options
  • This is THE brand these people sell
  • They KNOW this brand

Buy it now!

Amazon.com

$5.95

  • Amazon 9.13105
  • From a website you know.
  • They've already got your card info, right?

Buy it now!

Impreza WRX Suspension Bushing Overhaul

Give your WRX that edge you need with this Master Kit from Energy Suspension



Stop That Vicious Cycle

It’s a vicious cycle. Soft rubber bushings on a suspension result in deflection, which leads to the soft rubber bushings wearing faster. It is a cycle that you surely were not thinking about when you were first handed the keys to your Impreza and dreams of flying around corners with perfect handling began to consume your mind. The adrenaline rush that comes with a four wheel drift would come to an end pretty quickly when the tires have worn because of the bump steer caused by; you guessed it, soft rubber factory bushings. Thankfully, there is a solution to return your Impreza to the grandeur of old. Energy Suspensions’ 19.18102, a Master Bushing kit for your 08-14 Subaru Impreza WRX.

With Energy Suspension’s HyperFlex Master Kit 19.18102, you can complete a total overhaul of your suspension without costing an arm and a leg. The polyurethane bushing replacement will do away with the soft rubber bushings and replace them with Energy’s performance polyurethane. Polyurethane is durable and can withstand even the toughest of contaminants thrown its way. With these reliable performance bushings in place, your suspension will be given that boost it needs to improve handling and braking.

The 19.18102 also has an option of color: red or black. The letter indicator at the end of the part number will tell you what color bushings should be included in the box. For black the letter indicator is “G” and the red, “R.” That is 19.18102G for black and 19.18102R for red. Both of these colors use the same durometer and have the same cost, so go with whichever color you desire.

Front Control Arm Bushings
Bushings

Bushings To Be Replaced

The 19.18102 includes the Front Control Arm bushings, the Front Sway Bar bushings, the Steering Rack bushings set, the Shifter Bushings, the Transmission Cross-member bushings, the Rear Sway Bar bushings and End Links and the Rear Control Arm bushings. Each one of these bushings play an integral role in the performance of your suspension, so it is important to go with only the best material of suspension bushings.

Front Control Arms

Your front control arms handle a lot of stress, so it is no wonder why these are high failure bushings. When these bushings do fail, they leave a nice clunking noise and sloppy handling. Energy’s polyurethane can ensure your WRX won’t clunk as you fly down the road. This portion of the master kit will come with two bushings for the vertical position on your front control arms, and two bushings for the horizontal position. Energy has designed the horizontal pieces in a split design. This design allows for an easier installation of this normally tough to install bushing. This kit does not stop there. The rear control arms will be covered as well. All of the positions of the rear controls are covered, front and lower, as well as positions on the trailing arm and the lower toe adjustment. Installing these two kits alone are worth the price of admission, as the benefits are numerous. Improved handling, improved braking, a better feel around corners and perhaps most importantly, durability so you won’t have to install new bushings again.

Endlink Assembly

Sway Bars

Also included in the 19.18102 is new front and rear sway bar bushings and new rear end-link assemblies. New polyurethane sway bar bushings will grip your sway bar tightly, allowing your sway bar to effectively give the performance of a larger sway bar. The vehicle’s sway bar is responsible for maintaining maximum tire contact with the road while cornering and having worn out soft rubber bushing can lead to an uneven load distribution in your tires, causing you to lose speed in the corners and to wear the tires faster. These sway bar bushings will fit a 21mm front and a 16mm rear sway bar only. Many vehicle manufacturer’s do not have a standard size of sway bar even in the same year and model. Whenever choosing after market sway bar bushings, it is very import to measure the sway bar size on your vehicle to make sure the bushings will wrap around your bar. A bushing that is too small will not fit all the way over the bar, and a bushing that is too large will not grip the sway bar tightly leaving a loose bar. Either way, it is very important to get an exact size for proper fitment. Obtaining this measurement is best done with the assistance of callipers, but if this is not available to you, there is a simple way to measure your sway bar with just a wrench and a ruler. There is a how-to video on how to measure your sway bar

Complete Your Upgrade

To complete your suspension upgrade is the rear control arm bushing set. Pretty simply, if any point on your rear control arm has a bushing, this kit has you covered. Not only are there bushings for the upper and lower control arms, but this kit also includes the bushings for the toe adjust link, the subframe and the trailing arm. Just like the front control arm kit steel inner sleeves that match the OE bolt specs are included.

The 19.18102 is manufactured in the United States and is carries a two year warranty. Several tubes of Energy Suspension’s special Formula 5 pre-lube are included to ensure your bushings do not squeak. Check out the Energy Suspension Master Kit 19.18102, and transform your Impreza WRX back to the machine you fell in love with the first time your put the keys in the ignition.

Shifter Bushings